Server 99% rebuilt

Its official: the new server hardware for this site is now in place!

My apologies for the sporadic availability of this site during the last few days. All three of you are probably incensed 🙂 But as with any upgrade of this type involving hobbiest hardware and configurations, it wasn’t smooth.

There were a ton of bits and pieces that I had installed software-wise over the last year, some of which were critical to operating certain pieces of the site. Stuff like php-cli, nc, and other things of that ilk. But to add insult to injury, the new versions of several key pieces of the site (E.G. Apache, PHP) now handle configuration files differently. As “obvious” as certain directives no longer working, and as subtle as required environment variables now needing different initial values. So I couldn’t just copy over my old config files and call it a day.

With all of this hassle, you are probably wondering why I did this. I refer back to one of my previous entries here

The old server was an 866 MHz Pentium III. More than adequate for my needs. But now the server is running on a dual processor “2000+” (1.66 GHz) AMD Athlon configuration. Processing-wise, at least, I now have four times as much power. And a larger hard drive: nearly twice as big.

Of course, the most important thing is that I’ve freed up some hardware to use for building Irene a new computer. Yeah, that’s the ticket… 🙂


The old server was an 866 MHz Pentium III. More than adequate for my needs. But now the server is running on a dual processor “2000+” (1.66 GHz) AMD Athlon configuration. Processing-wise, at least, I now have four times as much power. And a larger hard drive: nearly twice as big.

Of course, the most important thing is that I’ve freed up some hardware to use for building Irene a new computer. Yeah, that’s the ticket… 🙂